X

Fluid-Applied Roof Coating Systems

  •  Silicone HS C - High-solids silicone system (7870) for use over concrete surfaces.
  •  Silicone HS M - High-solids silicone system  (7870) for use over metal surfaces.
  •  Silicone HS MB - High-solids silicone system  (7870) for use over modified bitumen surfaces.
  •  Silicone HS SP - High-solids silicone system  (7870) for use over single ply membranes such as TPO, PVC, EPDM, etc.
  •  Silicone C - Silicone system (7860-LO) for use over concrete surfaces.
  •  Silicone M - Silicone system  (7860-LO) for use over metal surfaces.
  •  Silicone MB - Silicone system  (7860-LO) for use over modified bitumen surfaces.
  •  Silicone SP - Silicone system  (7860-LO) for use over single ply membranes such as TPO, PVC, EPDM, etc.
  •  Metal Roof Coating - Acrylic urethane system (57010 Acrylithane™ HS2) for use over metal surfaces.
  • Elastacryl BUR/MB - Acrylic system (7251/7261) for use over smooth surfaced BUR/MB or granulated cap sheet.
  • Elastacryl M - Acrylic system (7251/7261) for use over metal surfaces.
  • Elastacryl SP - Acrylic system (7251/7261) for use over single ply membranes such as TPO, PVC, EPDM, etc
  • Elasta-Gard BUR/MB Aliphatic - Aliphatic urethane topcoat system (70620-CA/7490-CA series) for use over smooth surfaced BUR/MB or granulated cap sheet.
  • Elasta-Gard C Aliphatic - Aliphatic urethane topcoat, two-coat system (70620-CA/7490-CA series) for use over concrete surfaces.
  • Elasta-Gard M Aliphatic - Aliphatic urethane topcoat, two-coat system (70630/7490-CA series) for use over metal surfaces.
  • Elasta-Gard SP Aliphatic - Aliphatic urethane topcoat, two-coat system (70620-CA/7490-CA series) for use over single ply membranes such as TPO, PVC, EPDM, etc.
  •  Elasta-Gard Emulsion - Aliphatic urethane topcoat system (70620-CA/7490-CA series) with an asphaltic emulsion coat for use over smooth and granulated cap sheet, modified bitumen and built-up roof substrates.

Sprayed Polyurethane Foam Roof Coating Systems

  •  Silicone HS SPF - High-solids silicone system  (7870) for use over polyurethane roofing foam.
  • Elastacryl FR - Acrylic system (7251/7261) for use over 2.7 - 3.2 pound density polyurethane roofing foam.
  • Permathane Aliphatic II - Aliphatic urethane topcoat, two-coat system (70620-CA/7490-CA series) for use over 2.7 - 3.2 pound density polyurethane roofing foam.
  • Silicone FR - Silicone system (7860-LO series) for use over 2.7 - 3.2 pound density polyurethane roofing foam.

Archived Systems

  • Archived Roofing - Archived roof coatings are classic NEOGARD coating systems with long-standing use in the construction coatings industry; including LEED, BioPreferred and California's AQMD certified products.

Liquid Additives

  • 7922 - English / Spanish - Vertical Additive to Enhance Sag Resistance
  • 7923, 7925, 7931 - English / Spanish  - Liquid Additives to Accelerate Cure
  • 7986 - English / Spanish - Vanilla-Scented Additive to Mask Offensive Odors
  • 7987 - English / Spanish - Orange-Scented Additive to Mask Offensive Odors

Primers

  •  7710 - English / Spanish - Primer for Silicone Roof Coatings over Single-Ply Roof Substrates
  •  7711 - English / Spanish - Bleed-Block Primer for Silicone Roof Coatings over Asphalt Roof Substrates
  •  7720 - English / Spanish - Single-component, Low VOC Primer for TPO Substrates
  • 7780/7781 - English / Spanish - Water Borne Epoxy Pigmented
  • 7797/7798 - English / Spanish - General Purpose Urethane Primer
  • Chem-O-Pon - English / Spanish - Epoxy Primer for Metal Substrates
  • Ureprime HS2 - English / Spanish - Epoxy Urethane Primer
  • Ureprime HS4 -  English / Spanish - Low VOC Epoxy Urethane Primer

Roofing

Acrylic Urethane Catalyzed Coatings

Miscellaneous Products

Certified Applicator Information


In order to become a NEOGARD Certified Applicator in Roofing, your company must do the following:

Click here to read a formal letter addressed to new/potential NEOGARD Roofing applicators.
Click here to read a formal letter addressed to current NEOGARD Roofing applicators.

If your company has an existing agreement for Roofing and credit with Hempel, then you would only need to sign the new Certified Applicator Agreement via DocuSign. Contact your local Account Manager and provide company name, contact name and contact email address.
 

Certified Applicator Process



1. Management refers to Civil Sales Manager, Roofing Segment Manager and Business Development Manager.
2. If Applicator was previously certified, they will only need to have credit with Hempel and sign the new Certified Applicator Agreement. They may bypass all other steps in process.
***This step is bypassed if Applicator will purchase through Distribution.