Peda-Gard FC T System

Two component, fast cure, low odor urethane system with an integrally textured, aliphatic topcoat

Peda-Gard FC T is a urethane system with an integrally textured topcoat. It provides a consistent, well-textured finish with good anti-slip characteristics. The integrally textured topcoat eliminates the need for silica aggregates, reducing health concerns from silicosis. This system is ideal for high production applications.

Product Specifications
Application Methods
Product Literature
Technical Documents
FAQs

System Overview

Peda-Gard FC T’s low odor and fast curing allows for pedestrian traffic 24-36 hours after installation. The full coating system can be installed quickly, and it is compatible with the most stringent VOC regulations. This system is ideal for work in or near occupied buildings where odor may be an issue.

Peda-Gard FC T is integrally textured—it has a synthetic aggregate suspended in the coating. Applicators can install these coatings without broadcasting silica quartz aggregate, eliminating a production step and allowing a higher rate of production over standard coatings.

Eliminating the broadcast step also removes the use of hazardous silica sand on job sites, while achieving a more consistent textured surface and improving slip resistance compared to a system with manual aggregate broadcast.

Saving time is key for applications like renovations and routine maintenance, which are typically completed during a facility’s down time.

Selected Physical Properties

Product	Description	Test Method	Results
Peda-Gard FC T system	Dynamic Coefficient of Friction	ANSI A137.1	0.70, dry surface
Peda-Gard FC T system	Dynamic Coefficient of Friction	ANSI A137.1	0.53, wet surface

Consult Neogard Product Data Sheets and Guide Specifications for a complete list of physical properties.

Use Area:

Pedestrian

Type:

Urethane

Features:

High elongation base coat
Reduced application steps
Integral aggregate top coat
No presence of silica

Benefits:

Provides excellent crack bridging properties
Increased production
No need to broadcast aggregate, consistent textured finish and reduced exposure to silicosis
Reduced health hazard

Ask us about Peda-Gard FC T

Our Neogard Experts team is glad to tell you how Peda-Gard FC T is the best coating system to protect your investment.

1-833-443-6735

Peda-Gard FC T System Build

Before application, always check Neogard Product Data Sheets and Guide Specifications for mixing instructions and other important information.

Peda-Gard FC T

Coat	Product	Coverage Rate	Mils WFT/DFT
3 - Topcoat	FC7548/FC7964	95 sf/gal	13/12
2 - Base	FC7500/FC7960	80 sf/gal	20/20
1 - Primer	7780/7781 7797/7798	300 sf/gal 300-500 sf/gal	NA

Product Literature

Files may be downloaded individually or in a submittal package. Choose a language to select a file. Select one file and click the download button to the right, or select multiple files and click the “Download Selected” button below.

Technical Documents

selected

Safety Data Sheets (SDS)

FAQs

How long does Peda-Gard FC T need to cure before opening to pedestrian traffic?

Typically the coating needs to cure 24 hours before opening to pedestrian traffic. In cooler
temperatures this time may be 36 hours.

What type concrete curing compounds can be used with Peda-Gard FC T?

It is best to water cure concrete or use a sodium silicate curing compound. The use of acrylic
or other “film forming” compounds will create bond issues and must be removed.

What is the minimum temperature at which Peda-Gard FC T can be applied?

The coating should be applied at temperatures that are 40°F/4°C and rising during application.

What is the maximum concrete temperature that Peda-Gard FC T can be applied?

The coating should not be applied to deck surfaces that are =/> 100°F/38°C.

You can trust Peda-Gard FC T in your next project

High-performance protection tested under the harshest environments. Peda-Gard FC T was developed to endure intense pedestrian traffic while providing a seamless, durable protection against cracks and abrasion.